Continental Equipment Company • Phone 800-710-9674 • info@sterlizer.net
315 N. Village Terrace, Tonganoxie, Kansas 66086
© 2005 Continental Equipment Company
Water-Mizer®
Water-Mizer Plus®
The Water-Mizer® is a water saving and tempering device for steam sterilizers that efficiently mixes cold water with steam condensate discharged from the sterilizer, to reduce the discharged water temperature before it enters a municipal sewer system.
The Water-Mizer Plus® is the most complete water saving system for steam sterilizers. The patent pending system offers all of the same features as the Water-Mizer®…plus a water recirculation system. The system is intended for use on any steam sterilizer which uses cold water as a method of air removal (Vacuum sterilizers).
The Water-Mizer Plus® operates independently from OEM controls. Through the combination of recirculation and efficient tempering, the system has no peers in steam sterilization water efficiency.
When the Water-Mizer Plus® is installed and adjusted properly, the system will provide total water savings of 80% or greater, with per cycle savings of 250 to 400 gallons.
Water-Mizer® Savings Calculator
Water-Mizer Plus® Savings Calculator
Water-Mizer® Links
Click Here for links to independent studies and other information regarding our Water-Mizer® Technology.
Most steam sterilizers use continuous cold water (single pass cooling) to temper the steam condensate, which is wasteful. The Water-Mizer® monitors the drain temperature and applies cold water only when needed. The Water-Mizer®’s temperature actuated valve is time-tested to be reliable and maintenance-free. And, because it is non-electric, no wring is required. The Water-Mizer® operates independently from OEM controls and can be used with any steam sterilizer.
When the Water-Mizer® is installed and adjusted properly, the device will provide water savings of 2,000 gallons a day or greater.
"The Water-Mizer has had amazing results, and yet it's an extremely simple design"
Facilities Engineer
Stanford University